LED Behavior
LED
Behavior and Description
WAN & LAN Port LEDs
•
Green Steady: 1-Gb network connected.
•
Green Flashing: 1-Gb network activity.
•
Amber Steady: 100-Mb network connected.
•
Amber Flashing: 100-Mb network activity.
•
Off: No network is connected.
Bluetooth LED
•
Green Steady: Bluetooth configuration window is open (See
Bluetooth Button below.)
•
Blue Flashing: Bluetooth configuration is in progress.
•
Blue Steady: Bluetooth configuration is completed. The LED
will turn off itself in five (5) seconds.
•
Off: No Bluetooth configuration is allowed.
Control Button Usage
Button
Operating Instructions
Reset/Default Button
•
Press and hold for less than 5 seconds: Reset/Reboot the
device.
•
Press and hold for more than 5 seconds: Restore the
device to its factory default settings.
Bluetooth Button
•
Press and hold for less than 5 seconds: Ignored.
•
Press and hold for more than 5 seconds: Turns on the
Bluetooth LED and opens the Bluetooth configuration
window. (Note: The "window" closes if no Bluetooth
configuration activity occurs within 30 seconds. Re-
pressing the button has no effect while Bluetooth
configuration is in progress or if it is completed within 5
minutes.)
8
RF Connectors & System LEDs
Auxiliary 1
Main 1
Main 2
Auxiliary 2
LTE 1
GNSS 1
LTE 1 Signal Level 1
LTE 1 Signal Level 2
LTE 1 Signal Level 3
LTE 1 Signal Level 4
Power
FortiSASE/LAN Extension
Management
LTE 2 Signal Level 4
LTE 2 Signal Level 3
GNSS 2
LTE 2 Signal Level 2
LTE 2 Signal Level 1
LTE 2
9