Frequently Asked Questions; Technical Faults - Miele Inspira G2142SC Operating Instructions Manual

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Issue
The Start / Stop
indicator does not flash
after the dishwasher is
turned on with "s".
The dishwasher stops
during a program.
The program cycle
indicators "Rinse",
"Drying" and "End"
flash at the same time.
The drain pump is
running when the door
is open.
30
Possible fault
The machine is not
plugged in.
The fuse has tripped.
The fuse has tripped.
There may be a technical
fault.
The waterproof system
has activated.
Solution
Insert the plug.
Reset the circuit breaker.
See data plate for
minimum amperage.
Reset the circuit breaker.
See data plate for
minimum amperage.
– Turn the dishwasher off
"s".
After a few seconds:
– Turn the dishwasher on
"s".
– Select the desired
program with the
"Program" button.
– Press the "Start / Stop"
button.
If the problem persists,
contact Technical Ser-
vice.
– Turn off the water
supply.
– Contact Miele
Technical Service.