Table of Contents
Advertisement
1 Introduction
Scope
The purpose of these instructions is to describe the Emergency Stop Grab Wire Safety Switch system
LineStrong-series, and to provide the necessary information required for assembly, installation, checks and
adjustments after installation, and maintenance. The instructions also include information necessary to
connect LineStrong to a safety circuit.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
Basic knowledge of ABB Jokab Safety products.
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Danger of severe personal injury!
Warning!
An instruction or procedure which, if not carried out correctly, may result in injury to the
technician or other personnel.
Danger of damage to the equipment!
Caution!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB:
Notes are used to provide important or explanatory information.
2TLC172248M0201, rev. C
2020-11-11
4
www.abb.com/jokabsafety
Advertisement
Table of Contents
