Replacing The Rechargeable Battery - Miele Triflex HX2 Operating Instructions Manual

en-CA
Then run the vacuum cleaner to
vacuum up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can
remove them for easier cleaning (not
necessary in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush from the
Electrobrush (Fig. 44)
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove
stubborn soiling and clean the inside of
the Electrobrush.
 Unlock the cover on the side of the
Electrobrush so that the  symbol
becomes visible a.
 Lift the cover up as far as it will go b.
 Remove the roller brush c.
 Remove the roller brush handle if you
identify heavy soiling there d.
 Clean the roller brush and the roller
brush handle, and remove any
stubborn soiling inside the
Electrobrush.
 Reassemble the Electrobrush in
reverse order.

Replacing the rechargeable battery

An original Miele AP01 / AP02 / AP03
lithium-ion rechargeable battery (HX LA)
is required.
66
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following
sections: "Warnings and safety
instructions", "Caring for the
environment", and "Installation and
connection" ("General battery
information").