Maintenance; Optional Accessories; Filter System; Activating The Comfortclean Function - Miele Triflex HX2 Operating Instructions Manual

en-US
 Swing the vacuum cleaner forwards
until the Electrobrush connector audi-
bly clicks into place.
The vacuum cleaner stays securely up-
right, the Electrobrush switches itself off
and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.

Maintenance

Risk of injury caused by rotating

roller brush.
You can injure yourself on the rotat-
ing roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use
the On/Off switch on the Comfort
handle to do this.
It is recommended to use only genuine
Miele accessories bearing the "ORIGI-
NAL Miele" logo on the packaging.
Only these will guarantee the optimum
performance of your vacuum cleaner
and the best possible cleaning results.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not covered
by the vacuum cleaner warranty.

Optional accessories

Original Miele accessories are available
from the Miele Webshop, Miele Cus-
tomer Service, and your Miele dealer.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
180
With 3D4U, Miele also offers free ac-
cessories to download from your 3D
printer (www.miele.com, Service,
3D4U).
Filter system (Fig. 32)
 Fine dust filter (HX FSF-2)
 Pre-filter
 Dust container
d Dust container flap

Activating the ComfortClean function

(Fig. 33)
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning perfor-
mance again right away.
 The fine dust filter is located in the lid
of the dust container. Twist it counter-
clockwise by 3 180° turns. Use the
recesses to help you.