Replacing The Rechargeable Battery - Miele HS18 Operating Instructions Manual

 Remove the battery compartment
cover.
 Replace the batteries. Make sure the
polarity is correct.
 Close the battery compartment cover.

Replacing the rechargeable battery

An original Miele lithium-ion
rechargeable battery is required:
- YCR-M05 for Scout RX3
- YCR-MT12 for Scout RX3 Runner
and Scout RX3 Home Vision HD
The rechargeable battery compartment
is located in the robot vacuum cleaner's
storage compartment.
Observe the instructions regarding the
handling and disposal of rechargeable
batteries found in the "Safety notes
and warnings" and "Caring for the
environment" sections at the
beginning of these operating
instructions.
 Open the storage compartment.
 Remove the dust box.
 Open the rechargeable battery
compartment by unlatching the cover
upwards.
Scout RX3 (YCR-M05)
 Carefully pull the cables so that the
plug connection is pulled out of the
slot.
 Press the latch on the plug
connection in order to release the
plug.
 Remove the rechargeable battery.
 Insert the plug of the new
rechargeable battery into the
counterpart, making sure it clicks into
place.
 Insert the rechargeable battery
carefully, making sure it is properly
positioned (see right-hand side of
picture).
 Store the plug connection in the slot
at the side.
 Carefully refit the cover of the
rechargeable battery compartment
and close it, making sure it clicks into
place.
35