Table of Contents
Advertisement
Minimum PC Requirements
You can connect the MP-C945 to a computer with the USB 2.0 cable provided to transfer files
to your player or to charge its battery. The minimum requirements listed below will allow you to
perform basic file management functions; advanced features will require a faster PC and Windows
configuration.
•
MS Windows 98SE (Service Pack 1) or ME [USB-MSC];
MS Windows 2000 (Service Pack 3 or above) with Windows Media Player 9 [USB-MSC];
MS Windows XP (Service Pack 1 or above) with Windows Media Player 10 [USB-MTP]
•
Pentium 166 MMX processor
•
96MB RAM
•
50MB of available hard drive space
•
Internet connection
•
MS Internet Explorer 5.5
•
Video Display card
•
Sound card
•
USB 1.0 port (a USB 2.0 port will enable file transfers up to 40 times faster)
USB Mode Auto-Detection (MSC/MTP)
The MP-C945 comes equipped with a dual-mode USB 2.0 port. Your player will auto-detect the
type of computer system that it is connected to and will automatically switch to either USB-Mass
Storage Class (USB-MSC) mode or USB-Media Transfer Protocol (USB-MTP) mode. Both
USB modes allow for simple, high-speed transfers of files between your player and a computer,
and allow you to use your computer's operating system to view, manage, and transfer files to your
player from your computer
There are, however, a few differences to take note of.
USB-MSC
Simple plug-and-play support for all major
operating systems (Microsoft Windows
98SE/ME/2000, Macintosh OS X, Linux)
Supports Windows Media DRM 9
--
USB 2.0 high-speed file transfers
Database rebuild required after each USB
connection
USB CONNECTIONS
USB-MTP
Simple plug-and-play support for Microsoft
Windows XP with Service Pack 1 and Win-
dows Media Player 10 (or newer)
Supports Windows Media DRM 9 (WMDRM9)
Supports Windows Media DRM 10 (WM-
DRM10) -- requires Windows XP and Win-
dows Media Player 10 or newer
Windows Media Playlist support
USB 2.0 high-speed file transfers
Database rebuild not required
23
Advertisement
Table of Contents
