Inserting The Batteries; Troubleshooting; Adjusting The Keyboard Legs - Microsoft Comfort Optical Mouse 1000 Getting Started Manual

Inserting the Batteries

The keyboard requires three batteries and the mouse requires two, all of which are
included in the package. Whenever you insert batteries, always make sure they are
new. Alkaline batteries provide maximum battery life.
To insert the batteries
1 Turn the device upside down, and then remove the battery compartment cover.
2 Insert new batteries, making sure to properly orient the positive (+) and negative (–)
ends as specified by the battery compartment labels. Make sure you insert all three
batteries in the keyboard battery compartment.
3 Close the battery compartment cover.
Important
• Before using this product, read about the potential for radio interference in the topic
titled "Radio and TV interference regulations" in the Help files installed with the
software.
• Before boarding any aircraft, remove the batteries from the wireless keyboard and
mouse. The wireless keyboard and mouse can transmit radio frequency (RF) energy,
much like a cellular telephone, whenever batteries are installed and either a key is
pressed on the keyboard or the mouse is moved.

Troubleshooting

For optimum performance, make sure the wireless transceiver is as far away as
possible from any items that might cause interference. Items that might cause
interference include microwave ovens, wireless networking devices, and certain types
of cordless phones.
The keyboard or mouse may work up to 30 feet (9.1 m) away from the transceiver. This
distance varies depending on the positioning of the transceiver and wireless devices,
nearby items causing interference, and other factors.
If your device is not working properly, make sure to check the following:
• The Setup Wizard was run as specified in Step 1.
• The Bluetooth Connection Guide was completed as specified in Step 2.
• The wireless transceiver is properly connected to the USB port.
• New batteries are inserted and positioned correctly for each device.
If you are still having problems, refer to Keyboard Help or Mouse Help for additional
troubleshooting information.

Adjusting the Keyboard Legs

The keyboard legs are designed to accommodate various body sizes, chairs, and desks.
To adjust the keyboard legs
• Pull out or push in the keyboard legs to a position that minimizes bending of your
wrists while typing.
4
X09-75665-02_Mnl_Ret_Everest_Bluetooth_Suites.indd 4 6/1/2004, 1:28 PM