Insert Batteries; Connect To Pc - Microsoft Sculpt Comfort Manual

insert batteries: Press the button on the top of the mouse to release the
1
battery door. Insert two AA alkaline batteries, and replace the door.
A blue light on the bottom indicates that the mouse is on.
2 Connect to your pC: Press and hold the button on the bottom of the
mouse until the blue light flashes. Turn over the mouse. A light blinks
green and red for 6 minutes to indicate that the mouse is discoverable.
a. WinDoWs 8: From the Start screen, press
(or swipe in from the right) to open settings. Choose Change pC
settings, Devices, and then Add a device.
WinDoWs 7: From the Start menu, type add a device in the Search
box and press enter.
b. Select Microsoft sculpt Comfort Mouse from the list of devices.
Customization
Windows 8: Press
Tap or click search, then settings, then enter action center in the Search
box. In the Action Center, under Maintenance, then Device software,
choose install.
Windows 7: The Mouse and Keyboard Center app is available from the
Start menu.
www.microsoft.com/hardware/downloads
+ W on your keyboard (or swipe in from the right).
+ i on your keyboard