Mercedes-Benz GLE Coupe 2023 Operator's Manual page 138

136 Light and visibility
Turn the combination switch to the corre-
#
sponding position 1 - 5.
Single wipe/washing: push the button on the
#
combination switch in the direction of arrow
1.
í Single wipe
R
î Wipes with washer fluid
R
%
Observe the notes on washing the vehicle in a
car wash ( page 322).
/
Vehicles with MAGIC VISION CONTROL: in posi-
tion 2 or 3 , the windshield washing process is
automatically triggered if dirt is detected on the
windshield unless the Add Washer Fluid
is being displayed.
Changing the windshield wiper blades
& WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windshield wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
The wiper arms will move into the replacement
position.
message
Removing the wiper blades
Fold the wiper arms away from the windshield.
#
page 135).
/
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
far as it will go.
2
Slide catch
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm in
#
the direction of arrow 4.
1 as
3
in the direction of arrow