Kia Carnival 2022 Owner's Manual page 65

Safety features of your vehicle
3rd row outboard seat
OKA4030040
1. Route the seat belt webbing
through the rear seat belt guides.
It will help keep the belts from
being trapped behind or under the
seats.
2. After inserting the seat belt,
tighten the belt webbing by pull -
ing it up.
CAUTION
When pulling out to wear the seat
belt, the tongue should be slowly
pulled out of the seat belt guide so
that the seat belt guide does not
come off the trim.
Pre-tensioner seat belt
OON038092NR
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts.
The purpose of the pre-tensioner is
to make sure that the seat belts fit
tightly against the occupant's body
in certain collisions.
The pre-tensioner seat belts may
be activated in crashes where the
collision is severe enough.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor
will lock into position. In certain
frontal collisions, the pre-tensioner
will activate and pull the seat belt
into tighter contact against the
occupant's body.
If the system senses excessive ten -
sion on the driver or passenger's
seat belt when the pre-tensioner
system activates, the load limiter
inside the retractor pre-tensioner
Seat belts
3
3 41