Safety features of your vehicle
Removal and re-installation
2nd row seat
OKA4030032L
3rd row seat
OKA4030033L
To remove the headrest:
1. Raise it as far as it can go then
press the release button (1) while
pulling the headrest up (2).
To reinstall the headrest:
1. Put the headrest poles (3) into
the holes while pressing the
release button (1).
2. Adjust it to the appropriate
height.
Make sure the headrest locks in
position after adjusting it to prop -
erly protect the occupants.
After installing the headrest, make
sure that it is installed in the right
direction.
A headrest installed reversely could
increase whiplash injury during rear
impact.
WARNING
Make sure the headrest locks in
position after adjusting it to prop -
erly protect the occupants.
Forward and backward adjustment
(if equipped)
OKA4030049L
The headrest may be adjusted for -
ward or backward by pulling the
lower part of the headrest forward
or backward to the desired detent in
the direction of the arrow. Adjust
the headrest so that it properly
supports the head and neck.
Seat
3
3
31