Table of Contents
Advertisement
Basic Installation and Operation
Guide
Chapter 4 - User Interface & Menu Navigation
This chapter explains the keypad operator interface, the OLED
descriptions and the programming features.
4.1 Keypad/Operator Interface
The user keypad/ operator interface consists of:
•
2 row by 20 characters Organic Light-Emitting Diode (OLED)
•
12 LEDs
•
8 pushbuttons
Note: The soft starter is menu driven and there are three levels of
programming. The programming for two of these levels is password
protected. Level two requires a three digit password and level three
requires a four digit password.
4.1.1. Keypad Operator designations and functions
ITEM
DESIGNATION
MENU
RESET
ENTER
HELP
UP ARROW
KEY
RIGHT ARROW
DOWN ARROW
LEFT ARROW
POWER
RUN
LED
ALARM
TRIP
AUX 1- 8
Note: The directional arrow buttons require careful operation. In edit mode, if the buttons are held for a
long period, the scrolling speed will increase.
TOSHIBA
Toggle between the menu selection for metering and setpoint pages.
Will clear the trip indicator and release the trip relay.
In edit mode, press the ENTER pushbutton so the unit will accept the new
programming information. When not in the edit mode, the ENTER pushbutton
will toggle through the event indicator list (such as alarms or trips).
Provides general help information about a specific setpoint or action.
Will scroll up through the setpoint and metering menu page. It will scroll to the
top of the setpoint page or a section. In edit mode, it will increase a setpoint in
an incremental step or toggle through the available options in the setpoint.
In the main menu the RIGHT ARROW button provides access to the setpoint
page. For setpoint pages with multiple columns, the RIGHT ARROW will scroll
the setpoint page to the right. In edit mode, it will shift one character to the
right.
Will scroll down through the setpoint pages and down through the setpoints. In
edit mode, it will decrement through values and toggle available options in the
setpoint.
Will move to the left through setpoint pages with multiple columns. In edit
mode, it will become the backspace key and will shift one character to the left.
Indicates control power is present.
Indicates unit/motor is running.
Lights in conjunction with AUX 2 to indicate event or warn of possible critical
condition.
Lights in conjunction with AUX 1 to indicate a critical condition has occurred.
Auxiliary relays
JKSSS Series Solid State Soft Starters
POWER
RUN
ALARM
TRIP
1
5
2
6
3
7
HELP
4
8
AUX. RELAYS
DESCRIPTION
MENU
RESET
ENTER
34
Advertisement
Table of Contents
