僅 Stopping The Engine; Engine Start/Stop Button; 僅 Illuminated Engine Start/Stop Button; 僅 Engine Start/Stop Button Position - Kia Cerato 2022 Owner's Manual

Driving your vehicle
僅 Do not turn the ignition switch to the
START position with the engine run-
ning. It may damage the starter.
Stopping the engine
Manual Transmission
1. Make sure the vehicle is completely
stopped and keep the clutch pedal
and brake pedal depressed.
2. Shift the transmission into Neutral
whilst depressing the clutch pedal and
brake pedal.
3. Engage the parking brake whilst
depressing the brake pedal.
4. Turn the ignition key to the LOCK
position and remove it.

ENGINE START/STOP button

ENGINE START/STOP button
(if equipped)
Illuminated ENGINE START/STOP
button (if equipped)
OBD051001R
Whenever the front door is opened, the
ENGINE START/STOP button will illumi-
nate for your convenience. The light will
go off after about 30 seconds when the
door is closed. It will also go off immedi-
ately when the theft-alarm system is
armed.
ENGINE START/STOP button
position
OFF
With Manual Transmission
To turn off the engine (START/RUN posi-
tion) or vehicle power (ON position), stop
the vehicle then press the ENGINE
START/STOP button.
With Automatic Transmission /
Dual Clutch Transmission
To turn off the engine (START/RUN posi-
tion) or vehicle power (ON position),
press the ENGINE START/STOP button
with the shift lever in the P (Park) posi-
tion. When you press the ENGINE
6
6 11