Advertisement
STEP 5
Fitting your mask
The myAir app offers step-by-step
instructions to help you fit your mask
and check the seal. You can also follow
the steps below:
With your mask on your face,
A
connect the tube from your machine
to your mask.
On the Home screen, select "More" .
B
Under "THERAPY" , tap the Mask Fit
C
option and select "START" .
The machine will start blowing air
and a green tick will automatically
appear on the screen. Wait a few
seconds while the machine checks
your mask fit.
8
ResMed equipment start guide
A
B
C
If the green tick changes to an orange
D
exclamation mark, your mask may be
leaking and you might need to make
small adjustments to the fit.
Readjust the top and bottom headgear
E
straps so that your mask fits snugly
but is not pulled tight. You can also pull
the mask away from your face and
gently let it fall back against your skin.
Wait a few more seconds while the
F
machine checks your fit. When your
mask is properly fitted, you'll see the
green tick appear on the screen again.
When you're ready to start therapy,
G
press the START/STOP button.
D
E
F
G
ResMed.com/RemoteSetUp
9
Advertisement
