Download Print this page
Electrolux 6000 User Maintenance Manual
Electrolux 6000 User Maintenance Manual

Electrolux 6000 User Maintenance Manual

Tumble dryers
Hide thumbs Also See for 6000:

Advertisement

Quick Links

4
7
2
5
6
1
Remove any lint around
1
the machine
Clean the filter by removing the lint.
2
During intensive use, even after
every cycle
Cleaning external surfaces
Wash the external surfaces with warm, soapy water. Avoid using detergents containing abrasive substances, steel wool, brushes or
steel scrapers. Rinse with a damp cloth and dry carefully. Avoid using chlorine or ammonia-based products. Clean the control panel
with a soft cloth dampened with water and, if necessary with neutral detergent. Do not wash the equipment with direct or high pressure
jets of water. With the aim of reducing the emission of polluting substances into the atmosphere, it is advisable to clean the equipment
(externally and, when neccessary, internally) with products that have a biodegradability exceeding 90%. Electrolux Professional
strongly recommends to use Electrolux Professional approved cleaning agents, rinse and descaling agents to obtain better results
and maintain product efficiency over time. Damages caused by cleaning, as a consequence of use of not approved cleaning agents,
rinse and descaling, will be excluded by the warranty.
The operations described must be performed wearing the needed Personal Protection Equipment. Refer to the User Manual.
05UMW04___ENG00L6
Line 6000
Tumble Dryers
User maintenance guide
When the notification is displayed,
3
check that the second lint filter is clean
(remove the lint) and not damaged
Check that the door gaskets
4
are clean and not damaged
3
Check that the air intake is
5
not obstructed by dirt and
clean it if necessary
Check the drain and the
6
drain pipe are not obstructed
(for heat pump models)
daily
Clean the surface of the drum with
7
citric acid and, if necessary, an
daily
abrasive sponge making sure that
any recidues are taken off
Essentia
Planned Maintenance Programmes
In order to ensure the safety and performance of your equipment,
it is recommended that regular service is undertaken every
1
12 months by Electrolux Professional authorised engineers
per
in accordance with the manufacturer recommendations.
week
Please contact your local Electrolux Professional Service
Centre for further details of service agreements available.
Suggested for you
For more Accessories & Consumables
daily
please look at our Catalogues or contact
our Electrolux Service Partner.
every
3
months
every
3
months
every
3
months
2020-04-02
0W21DH
0W21DK
Dryer balls
Soft Care
2 pieces
sheets to soften
and scent your
laundry, 30 pcs
0W1XFY
0W1Y2F
Canvas Trolley
Stainless Steel
RV-74 - 200 lt
Trolley BV-220 /
BV-131lt
0W1Y2C
0HM803
Bulk Transport
Brush with
Cart HV-52
chain - 850mm

Advertisement

loading

Summary of Contents for Electrolux 6000

  • Page 1 (externally and, when neccessary, internally) with products that have a biodegradability exceeding 90%. Electrolux Professional strongly recommends to use Electrolux Professional approved cleaning agents, rinse and descaling agents to obtain better results and maintain product efficiency over time. Damages caused by cleaning, as a consequence of use of not approved cleaning agents, rinse and descaling, will be excluded by the warranty.
  • Page 2 Essentia Anomaly Description Instructions to User Machine indicates that Inlet air over heat protection 12:1 Switch off power to the machine and contact authorized service has cut out Machine indicates that Outlet air over heat protection 12:2 Push the control knob to restart the program has cut out 1.