ViewSonic N1930w-2M Service Manual page 10

6. Mechanical
The following table defines the mechanical specifications of this product for both chassis and cabinet.
Parameter
Dimension
W/O stand
Net Weight
Gross Weight
Net weight *without* stand
Chassis Plastic Material
External Plastic Chassis
Components
Exterior Chassis
Color/Texture/Details
Chassis Color Drift Due to UV-Light
Molded Plastic
Screen Printed Parts, Bird Logo
Recess
Rear Label
Wall Mount
Sample
In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable gap between
the buckets to bezel plastic pieces shall be within 1mm.The maximum acceptable gap between LCD
panel and bezel shall be within 1mm.
7. Environmental
The following table defines the operational/storage conditions of the product.
Operating Temperature
Humidity
Altitude
Storage Temperature
Humidity
Altitude
ViewSonic Corporation
443.0 x 375.9 x 213 mm
443.0 x 322.3 x 74.6 mm
4.85kg
6.46kg
4.43kg
ABS (ABS HB / PC)
Plastic Chassis, Cover, Stand (Metal + Plastic),Lens and Button
Refer to – Product ID Guide
The color drift due to UL-Light shall be less than 10 "Delta E" in the
1976 CIE L*a*b color space. Testing shall be performed according
to the requirements of ASTM Test Method D4459-93.
Workmanship shall be inspected according to ViewSonic Molded
Plastic Parts Specification, VSCMPPSPEC001V1.2.
Artwork shall be provided and confirmed by ViewSonic.
A label identifying the product name, model/serial number and FCC
ID/Logo shall be placed into the rear label recess located on the rear
panel of the chassis.
100 mm x 100mm VESA high hole (n=4), M4 X 10 mm, pitch
=0.7mm screw mounting kit not included.
Sample of textured color chips, plastic material specification, and
Material Safety Data Sheets shall be submitted to ViewSonic prior to
Mass Production Release.
0°C to +40°C
10% ~ 65% non-condensing
0 meter to +3000 meters above sea level
-20°C to +60°C
0 ~ 90% non-condensing
0 meter to 12,000 meters above sea level
7
Confidential - Do Not Copy
Specification
N1930w-2M