For Effective Use - Ariston S 3.5 COM PL Manual

EN

For effective use

1. Turn the water faucet (before inlet pipe) slowly until the lamps in the appliance switch "ON". Wait 15-20
seconds until hot water starts to flow. For colder water, turn the faucet increasing the water inflow gradually
until you receive the desired water temperature. For hotter water, turn the faucet decreasing the water inflow.
2. Heating setting:
OFF - Power is off
Low - Only the 1st Heating element switches on (left light on)
Med - Only the 2nd heating element switches on (Right light on)
High - 1st and 2nd heating elements switch on, working together (both lights on)
3. In AURES SLIM FLOW model, the user can manage the temperature selecting Heating knob and regulating
the water flow through water flow knob. The water flow knob allows to regulate the water flow reaching
the desired water temperature. Turning left the water flow knob, the water flow increases and temperature
decreases. Turning right the water flow knob, the water flow decreases and temperature increases. In AURES
SLIM DISPLAY, in addition to AURES SLIM FLOW, the user will see visualized on the product the outlet water
temperature
4. The spray outlet should be cleaned periodically by unscrewing it from the showerhead and clean thoroughly.
(Fig.2, Fig.4)
5. In order to achieve maximum efficiency from the unit please grip the showerhead and twist it in either
direction to increased or decreased flow - 3 positions (Fig.3).
For sink unit - Install open rings in summer and blind rings in winter (inner ring should
remain always open) (Fig.4).
6. The unit operates automatically by opening the water faucet and shut off when closing the water supply
Clean periodically
Fig.2
This product conforms to Directive WEEE 2012/19/EU.
The symbol of the crossed waste paper basket on the ap pliance indicates that at the end of its working
life the pro duct should be disposed of separately from normal domestic household rubbish, it must be
disposed of at a waste dispo sal center with dedicated facilities for electric and electronic appliances or
returned to the retailer when a new replace ment product is purchased. The user is responsible for the disposal of
the product at the end of its life at an appropriate waste disposal center. The waste disposal center (which using
special treatment and recycling processes effectively dismantles and disposes of the appliance) helps to protect
the environment by recy cling the material from which the product is made. For further information about waste
disposal systems visit your local waste disposal center or the retailer from which the product was purchased.
3 Setting Spray
Fig.3
6
Sink
Rings Combination
Summer
or 5kW & up
Winter
Fig.4