Connect The Cables - Sonos Ray Manual

Connect the cables

Before you start
Disconnect existing home theater or surround sound equipment from your TV.
Connect any external devices, like a cable box or DVD player, directly to your TV.
Turn your TV on.
1 Connect the power cord and plug in
the soundbar.
Note: Use only the supplied power
cord (using a third-party power cord
will void your warranty).
2 Remove the protective cap, then
connect the optical cable (included) to
the optical port on the back of your
soundbar.
3 Remove the protective cap, then
connect the optical cable to your TV's
optical digital OUT port.
(The TV's optical adapter's port is "D-
shaped"—make sure the connector
aligns correctly into the port. Inserting
the adapter incorrectly may damage
the cable.)