Cutting, Connecting And Tape Adhesion; Cutting And Apply End Cap - Philips Fortimo LEDFlex S Design-In Manual

Cutting, connecting and mounting

Cutting and apply end cap

Choose the desired length and cut the
strip with scissors. After cutting the silver
solder pads should be part of the LEDFlex
S without damaging the solder pads
For curing time see instruction
manual glue supplier
Radius > 30 mm
Diameter > 60 mm
≥ 100mm
7 - 25 Design-in Guide - LEDFlex S system
Radius < 30 mm
Diameter < 60 mm
November 2021