Haier LTF42M1C Service Manual page 13

Note: This function operates according to information from the broadcasting station. Therefore if the signal has no
information, this function does not operate.
3. Input Block: To disable the specific external input signals.
4. Set Password: To set or change your password. Please follow the instructions to set it. All number combinations
from 0000 to 9999 are valid.
Tip: Remember that 5351 is the default Change Password code. If your access code has been changed or you have
forgotten the code, you can always get in by inputting the default code.
5. Clear All: To clear all the settings in the parental submenu.
Common Interface Module
The Common Interface CI Slot, is designed to accept the Conditional Access CA Module coupled with a Smart card,
in order to view pay TV programmes and additional services. Contact your Common Interface service provider for
further information about modules and subscription options. Please note that CA modules and smart cards are not
included, or supplied as optional extras by us.
WARNING: Switch off your TV before any module is inserted into the Common Interface slot.
1. Correctly insert the CA Module and then the Smart Card into the CI slot located at the side of the TV.
2. Turn on the TV and press MENU and select the TV submenu.
"Common interface" will be displayed if the CA module is detected. Wait for few moments until the card is activated.
13