Document Conventions - ABB Relion 670 Series Communication Protocol Manual

Hide thumbs Also See for Relion 670 Series:

Table of Contents

1MRK 511 396-UEN E

Although warning hazards are related to personal injury, it is necessary to understand that

under certain operational conditions, operation of damaged equipment may result in

degraded process performance leading to personal injury or death. It is important that the

user fully complies with all warning and cautionary notices.

1.4.2

Document conventions

•

Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary

also contains definitions of important terms.

•

Parameter names are shown in italics.

For example, the function can be enabled and disabled with the

•

Each function block symbol shows the available input/output signal.

•

Dimensions are provided both in inches and millimeters. If it is not specifically mentioned

then the dimension is in millimeters.

SPA, 670 series

Communication protocol manual

The tip icon indicates advice on, for example, how to design your project or

how to use a certain function.

the character ^ in front of an input/output signal name indicates that the signal

name may be customized using the PCM600 software.

the character * after an input signal name indicates that the signal must be

connected to another function block in the application configuration to achieve a

valid application configuration.

Section 1

Introduction

GUID-96DFAB1A-98FE-4B26-8E90-F7CEB14B1AB6 v8

Operation setting.

Table of Contents