Maytag Jetclean II MDB5651AWW Use And Care Manual page 9

Cycles, Options and Lights
Cycles
Choose the cycle that best describes your dishload by pressing the corresponding touchpad. (See page 3,
Operating Tips, for how to begin the cycle).
CYCLE
Heavy Wash
Normal Wash
Light Wash
Auto Clean
(select models)
Rinse Only
Insta-Wash
(select models)
* Number of fills will vary depending on the soil level of each load.
Notes
• Depending on water temperature, there may be time added to the cycle to bring water up to temperature.
• Cycle times shown in the numerical display (select models) will increase or decrease, based on each load's soil
level, water temperature and selected options.
• Only the following certified cycles have been designed to meet NSF requirements (NSF/ANSI 184 Residential
Dishwasher) for sanitization: Auto Clean (select models), Heavy Wash, Normal Wash and Light Wash.
DESCRIPTION
Long cycle for heavy food soils.
Medium cycle for average food
soils. Precision Clean™ Turbidity
sensor is active with this cycle.
Short cycle for light food soils.
Designed to select the number
of water fills best suited for the
soil level of each load. Precision
Clean™ Turbidity sensor is active
with this cycle.
Rinses dishes being held until
there is a full load.
Quick cycle for light food soils.
Does not include drying time.
TIME
(APPROX.
MINUTES)
132
97-117
82
94-128
9
38
8
NUMBER OF
WASHES/RINSES
2 washes/3 rinses
1-2 washes*/1-2 rinses*
1 wash/2 rinses
1-2 washes*/2-3 rinses*
1 rinse
1 wash/2 rinses