Furuno WV-100 Operator's Manual page 5

Restrictions on wave analysis
The following restrictions apply to wave analysis.
Radar settings
• Pulse width: Must be set between S1 and M1 (S1 has the highest measurement accuracy.)
• The wave analysis is not available when using the interswitch function. (The slave echo for the
interswitch is used for the wave analysis. The wave setting is canceled at the interswitch.)
Operational specification of wave radar
• This software analyzes wave data using the radars specified beforehand.
• To enable wave analysis, access the settings on the connected radar and switch [WAVE
MODE] to [ON].
In both cases, an error display appears when the analysis results are outside the capabilities of
this software.
Program version no.
0359495-01.**
* denotes minor modifications.
Software used in this product
This product includes software to be licensed under BSD, MIT, zlib, FTL, NVIDIA CUDA Toolkit
License Agreement. Please refer to the OSS directory in the supplied CD-ROM for details on the
terms of the software.
iii
FOREWORD