Security Recommendations - Siemens SIMATIC RF660M Operating Instructions Manual

Safety instructions

2.2 Security recommendations

NOTICE
Maximum permissible transmit power
Maximum permissible transmit power in the frequency band:
• WLAN:
• RFID: Max. 42 dBµA/m at 10 m distance (mag. field strength)
Damage to retina due to camera flash
Do not flash the camera directly into the eyes of persons in the vicinity or your own eyes, as
this could damage the retina.
Note
Switching on the display in Idle mode
If the display of the mobile reader is in Idle mode, it can be activated by pressing the "Power"
button briefly.
2.2 Security recommendations
To prevent unauthorized access, observe the following security recommendations when
working with the reader and WBM (Web Based Management).
General
• Check regularly that the device complies with these recommendations and/or other
internal security policies.
• Do not connect the device directly to the Internet. Operate the device within a protected
network area.
• Do not establish a WLAN connection with the device. If you do establish a WLAN
connection, make sure that it is a secure connection.
Physical access
• Restrict physical access to the device.
• The device does not have user management functions. Make sure that only adequately
qualified and authorized personnel have access to the device.
• Lock unused physical ports (e.g. Ethernet ports) on the device. Unused ports can be used
to access the system without authorization.
8
– Max. 100 mW in 2.4 GHz band
– Max. 200 mW in 5 GHz band
CAUTION
Mobile reader SIMATIC RF660M
Operating Instructions, 02/2022, C79000-G8976-C660-01