Table of Contents
Advertisement
Digital Coaxial (5.1-Channel) Audio
The DVD player can output 5.1-channel surround sound audio through the Coaxial Digital Audio jack.
You will need a Dolby Pro Logic Surround amplifier and a digital coaxial cable to use this feature.
To COAXIAL Out (TV-DVD1260)
Note:
•
Please refer to your receiver's instruction manual for more information on how to properly set
up your surround sound system.
•
To minimize interference, use either the Digital Coaxial Audio or the RCA Audio connection
ONLY.
•
Digital Coaxial Audio output works with the DVD player, only.
External Antenna Input
Use the TV with an external antenna instead of the built-in telescopic antenna.
1.
Attach an external antenna (RF, Cable) to the external antenna adapter.
2.
Plug the adapter into the external antenna jack (ANT.) of the unit.
3.
Set the Function Switch to TV.
External Audio/Video Input
Use the TF-DVD1256 to display external devices (e.g., VCRs, video games, portable media play-
ers, etc.) on screen.
1.
Connect an external device to the unit's Rear AV jacks with the supplied AV Cable (L, R,
VIDEO).
•
Note that the Rear AV jacks are used for both AV input and DVD output.
2.
Set the Function Switch to the DVD position.
3.
Press the DVD/AV key on the remote control to switch to AV Input mode.
CONNECTIONS
Dolby Pro Logic Surround Amplifier
To Digital Coaxial
Input
Coaxial Cable
(not supplied)
13
Advertisement
Table of Contents
