Black Max BMC001 Operator's Manual page 4

CAUTION:
To reduce the risk of injury, never attempt to lift the work
station until the rear leg has been properly secured in
place.
FOLDING AND/OR CARRYING THE WORK
STATION
See Figures 5 - 7.
 Pull the lock/unlock latch up to unlock.
 Step down on the foot pedal letting the pedal rise
to release the clamps.
 Place the arm transport lock in the locked position.
 Turn the work station over and place it upside down on
the ground.
 Unlock the left front lock knob by turning the knob one
half turn. Lower the left front leg until the leg rests on the
housing.
 Repeat with the right front lock knob and right front leg.
 Place a finger in the foot pedal release and pull up to
unlock the foot pedal.
 Lower the foot pedal until it rests on the housing.
 Unlock the rear lock knob by turning the knob counter-
clockwise.
 Pull up on the rear leg and slide the leg toward the front
of the work station.
 Once the rear leg is resting on the housing, slide the rear
leg back.
 With the rear leg pushed back as far as it will go, slide
the rear leg into the leg storage hole.
 Turn the rear lock knob clockwise to tighten securely.
NOTE: When transporting the work station, the rear leg
becomes the carrying handle.
LEFT
FRONT
LEG
ASSEMBLY
REAR LOCK
KNOB
RIGHT
FRONT
LEG
Fig. 5
Page 4 — English
FOOT PEDAL
RELEASE
LEG STORAGE
HOLE
Fig. 6
REAR
LEG
Fig. 7