Dtmf Single Tone Transmit Selection - Panasonic KX-FHD332C Service Manual

Test Mode Type of
SENSOR Service
CHECK & VOX
CHECK
Note:
The numbers in the boxes (XXX) indicate the keys to be input for
the various test modes.

6.3.1. DTMF SINGLE TONE TRANSMIT SELECTION

When set to ON (=1), the 12 keys and transmission frequencies are as shown.
Code
Mode
Operation after
code input
"8" "1" "5"
Mode
START
If you enter this mode and operate sensor levers with
hands, the LCD display of the related sensor (or switch)
turns ON / OFF. Also, when copying a document, the
related sensor will turn ON / OFF. ( Do, Sn, Co, Pt,
For each sensor's operation, refer to
SWITCHES().
[Do Sn Co Pt Vx] : LCD DISPLAY
Do: Document set sensor
:Paper inserted. Turns on when a document is inserted.
Sn: Read position sensor.
:At the read position, turns on when the front cover
opened and the sensor lever is pressed directory.
Co: Cover open sensor / Film end sensor
:Cover open of don't set the film. Turns on and off
front cover is opened and closed.
Pt: Paper top sensor
:Sensor on Turns on when the front cover is opened
the sensor lever is pressed directly.
Vx: Vox signal
:Detection signal for the tone on the line. Turns on
there is a tone signal on the line.
72
Function
SENSORS AND