Remote Operation - Travis Industries GS2/MV Manual

GS2 Basic Wall Mount Remote Operation
SKU# 99300695

Remote Operation

When the switch on the receiver is set to "REMOTE" the transmitter operates the fireplace. Once you understand
how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has three main sections (see below).
Thermostat Display
Room Temperature Display
F
ON
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame, Blower, Light, Comfort Control)
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will come from the IFC. When
you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep intermittently. When the batteries are nearly
depleted, the IFC will no longer beep. See "Receiver Batteries" on page 16).
Page 14 of 18 17602250 - 10/7/22 Travis Industries, Inc.