Travis Industries GS2 Installation Manual

Basic wall mount remote

Advertisement

Compatibility
Radiant Large GSB2 & MV
Radiant Medium GSB2 & MV
Radiant Small GSB2 & MV
Packing List
(1) Remote Transmitter
(1) Remote Receiver w/ Attached Wire Harness
(1) Switch Blank
Warnings
The transmitter and receiver are radio frequency devices. Placing the transmitter in or near metal may
severely reduce the signal range.
Turn off power to the heater during installation or maintenance (unplug or turn off at the breaker).
Turn off the main gas supply to the appliance during appliance installation or maintenance.
REMOTE CONTROL / PILOT WARNING: Installing batteries in the battery holder or connecting the
appliance to power may automatically initiate the CPI pilot mode, resulting in a lit pilot flame. Do not
place combustibles inside the firebox.
If Using the Optional Blower, Install it First
The optional blower should be installed before installing the remote.

Table of Contents

MV Fireplace and Insert Installation ....................................................................... 2
MV Stove Installation .............................................................................................. 3
GSB2 Installation .................................................................................................... 4
Wiring Diagram MV ................................................................................................ 5
Wiring Diagram GSB2 ............................................................................................ 6
Operating Instructions ............................................................................................ 7
Direct Fireplace Operation ...................................................................................... 8
Remote Operation .................................................................................................. 9
Low Battery Indicator ............................................................................................ 11
Display Fahrenheit or Celsius ............................................................................... 11
Power Outages ..................................................................................................... 12
Child-Proof Feature .............................................................................................. 12
How to Turn the Thermostat Feature On and Off................................................. 12
Disabling Modes From the Remote ...................................................................... 13
Page 1 of 13
GS2 Basic Wall Mount Remote Installation
42 PB Linear GSB2 & MV
54 PB Linear GSB2 & MV
72 PB Linear GSB2 & MV
17601967 - 2/12/19
SKU# 99300695
Northfield MV
Berkshire MV
Greenfield MV
(4) AA Batteries
(3) AAA Batteries
36 PB CF GSB2 & MV
42 PB CF GSB2 & MV
Travis Industries, Inc.

Advertisement

Table of Contents
loading

Summary of Contents for Travis Industries GS2

  • Page 1: Table Of Contents

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 Compatibility     Radiant Large GSB2 & MV 42 PB Linear GSB2 & MV Northfield MV 36 PB CF GSB2 & MV     Radiant Medium GSB2 & MV 54 PB Linear GSB2 &...
  • Page 2: Mv Fireplace And Insert Installation

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 MV Fireplace and Insert Installation This set of installation instructions shows a summary of the remote installation. For detailed instructions on placement of the receiver and other details, refer to the installation manual included with your appliance.
  • Page 3: Mv Stove Installation

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 MV Stove Installation This set of installation instructions shows a summary of the remote installation. For detailed instructions on placement of the receiver and other details, refer to the installation manual included with your appliance.
  • Page 4: Gsb2 Installation

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 GSB2 Installation This set of installation instructions shows a summary of the remote installation. For detailed instructions on placement of the receiver and other details, refer to the installation manual included with your appliance.
  • Page 5: Wiring Diagram Mv

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 Wiring Diagram MV Receiver (Manual On/Off) (4) AA Batteries Thermocouple Thermopile Piezo Igniter Red* Brown* * Some units use green & white wires with additional on/off circuit. Copper Co-Axial Wire Orange Spark Electrode...
  • Page 6: Wiring Diagram Gsb2

    GS2 Basic Wall Mount Remote Installation SKU# 99300695 Wiring Diagram GSB2 Rheostat Thermodisk Optional Blower(s) 120 VAC Power In Appliance Ground 3.15A FUSE Base Pilot Sensor Integrated Flame Fireplace Detect Control Spark (IFC) Appliance Ground IPI/CPI Switch (4) AA Batteries...
  • Page 7: Operating Instructions

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Operating Instructions Transmitter Battery Installation Install the three included AAA batteries into the remote (see illustration below). Receiver Battery Installation Install four AA batteries into the receiver (see illustration below). You can use the batteries from the battery backup tray on the appliance.
  • Page 8: Direct Fireplace Operation

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Synchronize the Transmitter to the Remote The transmitter will need to be synchronized to the receiver before the remote will work correctly. Synchronizing is done in the following two steps below (see illustration below): a) Press the PRG (Program) button on the receiver (receiver will beep 3 times).
  • Page 9: Remote Operation

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Remote Operation When the switch on the receiver is set to “REMOTE” the transmitter operates the fireplace. Once you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.
  • Page 10 GS2 Basic Wall Mount Remote Operation SKU# 99300695 Manual On-Off / Standard Thermostat Use the thermostat button to cycle through the two thermostat settings (see below). Look here for the Press the thermostat button to cycle thermostat setting. through the thermostat settings.
  • Page 11: Low Battery Indicator

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Low Battery Indicator Transmitter Batteries The transmitter has a battery-level indicator. When it indicates low battery voltage (see Figure 1 below), install four new AAA alkaline batteries into the transmitter (see “Transmitter Battery Installation” on page 7).
  • Page 12: Power Outages

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Power Outages On MV versions of the appliance, the receiver is powered by batteries only so power outages will not change the function operation of the remote but the optional fan, if installed, will not operate.
  • Page 13: Disabling Modes From The Remote

    GS2 Basic Wall Mount Remote Operation SKU# 99300695 Disabling Modes From the Remote NOTE: The remote is shipped with the modes disabled. These instructions are for reference purposes only. Remove one battery from the remote. Press down on the on/off button and mode button while replacing the battery.

This manual is also suitable for:

Gsb299300695

Table of Contents