Table of Contents
Advertisement
Available languages
Available languages
Energy consumption values
Programmes
Capacity (kg)
Cottons Eco *
Cottons Iron dry
Synthetics cupboard
dry
"Cottons Eco programme" used at full and partial load is the standard drying programme to
which the information in the label and the fiche relates, that this programme is suitable for drying
normal wet Cottons laundry and that it is the most efficient programme in terms of energy
consumption for Cottons.
* : Energy Label standard program (EN
61121:2012) All values in the table are
determined according to EN 61121:2012
standard. Consumption values may vary from
the values in the chart depending on laundry
type, wringing speed, ambient conditions and
voltage levels.
Allergy UK is the brand of the
British Allergy Association. Seal
of Approval is created to guide
people that require
recommendation about a
product that the related
product restricts / reduces / eliminates the
allergens or reduces the allergen content
significantly in the ambient where allergy
patients exist. It aims to provide assurance
that the products are tested scientifically or
examined in a way to provide measurable
results.
5.5 Auxiliary functions
Buzzer / time
Drying machine makes an audible warning
when the program is completed. If you don't
want the machine to make an audible warning,
press the "Buzzer / Time" button. When you
press the Buzzer/Time button, a light will
illuminate and no audible warning will be made
when the program ends.
38
7
7
3,5
C
•
You can select this function before or
after the program starts.
Buzzer/Time button is used to adjust program
duration while the Rack/Time programs are
selected.
Drying Level
Drying Level button is used for adjusting to
desired dryness level. Program duration may
change depending on the selection.
C
•
You can activate this function only prior
to start of program.
End time
You can delay the end time of the program up
to 24 hours with End time function.
1.
Open the loading door and place the
laundry.
2.
Select the drying program.
3.
Press the End Time selection button and
set the delay time you wish. End Time
LED will illuminate. (When pressed and
hold the button, End Time proceeds non-
stop).
4.
Press the Start / Stand-by button. End
Time countdown starts. ":" Separator in
the middle of displayed delay time flashes.
1000
60%
1000
60%
800
40%
NOTE
NOTE
Dryer / User Manual
2,29
1,80
0,80
Advertisement
Table of Contents
