Table of Contents
Advertisement
Accessibility
Note:
R Noise reduction is automatically turned on when the booster is turned
on. In this case, the menu that allows you to turn off noise reduction is
not shown even after you press MMENUN while on a call.
R
you turned on the volume booster.
R If the auto boost feature is turned on (page 16), volume booster
turns on automatically when you make or answer a call. If the auto
boost feature is turned off, volume booster turns off automatically at
the end of each call.
Turning on auto boost
If the auto boost feature is turned on, volume booster turns on
automatically when you make or answer a call. This feature is useful if
the unit is used mainly by a user who is hard of hearing.
1
MMENUN#782
2
MbN: Select the desired setting. a MSAVEN a MOFFN
R If the volume booster is turned on, the BOOST indicator lights in
Note:
R While on a call, you can temporarily turn the volume booster off by
pressing MBOOSTN, and adjust the volume by pressing MjN or MkN
on the side repeatedly.
Adjusting the volume
While on a call, you can adjust the volume by pressing MjN or MkN on
the side repeatedly.
R The selected volume setting is shown on the handset display.
R The selected volume setting is applied immediately and is also used
for future calls. A separate setting is used for when volume booster is
on and when it is off.
16
TGMA44_45(en)_0426_ver021.pdf 16
is not shown if the noise reduction feature was turned off before
red during a call.
For assistance, please visit http://shop.panasonic.com/support
2016/04/26 10:11:32
Hide quick links:
Advertisement
Table of Contents
