Table of Contents
Advertisement
3
Push and hold the push-pin buttons on
the rear side of the frame as you slide
the handle over the frame. Push down
or pull up the handle until the buttons
snap through, securing the handle in
place.
7
Turn on the water tap.
12
Squeeze and hold the trigger to operate
the product.
4
1
Connect the hose collar of the high pressure hose into the water outlet port and
turn it clockwise to secure the hose. Avoid cross-threading the collar and the outlet
coupler to avoid leaks.
8
1
30 sec
Push down the trigger lock out until it clicks into place. Squeeze and hold the
trigger for 30 seconds to relieve air pressure, run water, and clean any debris
from the hose.
2
Getting started
5
9
2
9
Advertisement
Table of Contents
