Advertisement
Advertisement
Troubleshooting
Related Manuals for Horizon Fitness T4000 Premier
Summary of Contents for Horizon Fitness T4000 Premier
- Page 1 T4000 Premier (TM219B) SERVICE MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION CHAPTER 2: ENGINEERING MODE CHAPTER 3: TROUBLESHOOTING Troubleshooting - No Power to the Console Troubleshooting – No Resistance Troubleshooting – No Hand Pulse Respond Troubleshooting – Chest Belt No Respond Troubleshooting – Speed Do Not Display Troubleshooting –... -
Page 3: Chapter 1: Serial Number Location
CHAPTER 1: Serial Number Location The serial number is located on the front tube of frame... -
Page 4: Chapter 2: Engineering Mode
CHAPTER 2: Engineering Mode 2.1 ENGINEERING MODE 1) To enter Engineering Mode, press & hold the INCLINE “－ － － － ” “▲” and SPEED DOWN keys at the same time for 3-5 seconds until Engineering Menu appears on the display. -
Page 6: Chapter 3: Troubleshooting
CHAPTER 3: Troubleshooting 3.1 TROUBLESHOOTING – NO POWER TO THE CONSOLE POWER THE CONSOLE 1) SYMPTOM: a. The power switch is in the on position, but the console will not turn on. 2) SOLUTION: a. Check to see if the connection of adapter is well. b. -
Page 7: Troubleshooting - No Hand Pulse Respond
NO HAND PULSE RESPOND 3.3 TROUBLESHOOTING – NO HAND PULSE RESPOND 1) SYMPTOM: a. The console did not display the heart rate during exercise 2) SOLUTION: a. The user has to hold the sensor with both hands. b. Check to see if the wires connect with sensor is well. c. -
Page 8: Troubleshooting -Speed Do Not Display
3.5 TROUBLESHOOTING –SPEED DO NOT DISPLAY SPEED DO NOT DISPLAY 1) SYMPTOM: a. The speed value do not display on console 2) SOLUTION: Check to see if the console wire has good connected between console and 12 pins connector b. Check to see if the speed sensor wire has connection well. 3.6 TROUBLESHOOTING –CAN NOT TO DO RECOVERY FUNCTION CAN NOT TO DO RECOVERY FUNCTION 1) SYMPTOM:...