Akai APC mini mk2 User Manual page 8

7. Scene Launch Buttons: Normally, you can press one of these buttons to
launch the corresponding scene—represented by the row of eight Clip
Buttons to its left.
Press and hold Shift and then press one of the top five buttons labeled Soft
Keys to change the function of the Clip Stop Buttons, which can then stop,
solo, record-arm, mute, or select their corresponding tracks (see #3. Clip Stop
Buttons above).
Press and hold Shift and press the sixth or seventh buttons to enter Drum or
Note modes for the Clip Buttons. See
about these modes.
Press and hold Shift and then press the eighth (last) button (Stop All Clips) to
stop all clips when they reach the end.
8. Shift: Press and hold this button and then press a Scene Launch button to
change the function of the Clip Stop Buttons (see #3. Clip Stop Buttons
above).
Press and hold this button and then press one of the right four Clip Stop
Buttons (, , , ) to shift the viewable 8x8 matrix of clips. In Ableton Live's
Session View, this is indicated by a red rectangle around the clips.
Press and hold Shift and press one of the left four Clip Stop Buttons (Volume,
Pan, Send, Device) to put APC mini mk2's Faders in the corresponding mode
(see #4. Faders above).
8
Advanced Operation to learn more