Deep Cleaning The Print Head - Canon Q30-3201-US1 User Manual

3
3

Deep cleaning the print head

When there is sufficient ink in the ink tanks and several print head cleanings have not solved the
problem, execute print head deep cleaning.
• Print head deep cleaning consumes ink so execute deep print head cleaning only after several print
Memo
Windows
1.
Make sure the printer is switched on.
2.
Click the Start button, point to Settings, and click
Printers.
3.
Right-click the Canon BJC-8200 icon and select
Properties.
4.
Click the Maintenance tab and click the
deep cleaning) icon.
5.
Read the message and click the OK button.
6.
Read the message and click the OK button.
• The BJ Status Monitor opens and remains open until print head
deep cleaning is completed.
• Print head deep cleaning begins and the POWER/ERROR lamp
flashes for 1 minute until deep cleaning is completed. Wait for the
POWER/ERROR lamp to stop flashing. When the POWER/ERROR
lamp lights and remains on, you can resume printing.
7.
Print a nozzle check pattern and check the results of the
print head deep cleaning.
• After executing print head cleaning five times and print head deep
cleaning, if the results of the nozzle check pattern are still not
satisfactory, the BJ Print Head may be damaged or worn out.
Replace the BJ Print Head.
Reference
72
head cleanings fail to correct faded prints.
• Printing a nozzle check pattern (P.68)
• Replacing the BJ Print Head (P.77)
ON
(Print head
A
Click!
Click!
Click!
B C D E
F