Table of Contents
Advertisement
Setting media correctly
Follow the instructions below to load the paper in the printer.
• For details about loading Transparencies (OHP film), T-Shirt Transfer, and Banner Paper, see the
Reference
"BJC-8200 Reference Guide" provided on the CD-ROM.
Loading Photo Paper Pro PR - 101
1.
Raise the paper thickness lever to the
2.
Raise the paper rest, lower and pull out the paper output
tray.
3.
Slide the paper guide completely to the left.
4.
Set the Roller Cleaning Plate (provided with the printer)
into the Sheet Feeder.
• With the patches up and pointing down, align the Roller Cleaning
Plate with the right side of the sheet feeder.
• The Roller Cleaning Plate is used to load Photo Paper Pro as well
as clean the paper rollers.
5.
With the glossy side facing up, place the sheet of Photo
Paper Pro on top of the Roller Cleaning Plate, align the
sheet with the right side of the sheet feeder and insert
the sheet into the printer until it stops.
Caution
Memo
6.
Move the paper guide to the left edge of the sheet.
42
• Handle media carefully by its edges. Never touch
the print surface (the glossy side of the sheets).
Dirt or fingerprints on the print surface will
adversely affect print quality.
• You can load only 1 sheet of Photo Paper Pro in the
sheet feeder.
mark.
Patches
Gloss side
Advertisement
Table of Contents
