Makita HR3000C Instruction Manual page 7

1 2
3
4
1. Change lever
2. Shift lever
3. Lock button
4. "Rotation with hammering" symbol
1
2
1. Pointer
2. "Rotation with hammering" symbol
1
2
1. Pointer
2. "Rotation only" symbol
1
2
1. Pointer
2. "Hammering only" symbol
Selecting the action mode
003126
When selecting an action mode, first set the change lever
and the shift lever to the position shown in the figure. Then
proceed as follows.
Rotation with hammering
003129
For drilling in concrete, masonry, etc., depress the lock but-
ton and rotate the change lever so that the pointer points to
the symbol. Use a tungsten-carbide tipped bit.
Rotation only
003132
For drilling in wood, metal or plastic materials, depress the
lock button and rotate the change lever so that the pointer
points to the
Hammering only
003134
For chipping, scaling or demolition operations, depress the
lock button and rotate the change lever so that the pointer
points to the
chisel, etc.
symbol. Use a twist drill bit or wood bit.
symbol. Use a bull point, cold chisel, scaling
7