Table of Contents
Advertisement
Tighten the lock nuts against the
3.
housing with an open-end wrench
SW17 hand-tight.
Hold the appliance foot while
doing so and do not adjust the
height.
4.7 Connecting the appliance
electrically
Remark:Your home electrical
installation for this appliance must
comply with local legal and safety
regulations and must include an
earth leakage circuit breaker.
Insert the mains plug of the
1.
appliance's connecting cable into
a socket in the vicinity of the
appliance.
The connection data of the device
can be found in the technical data
→ Page 53 .
Check the mains plug for tightness.
2.
Set up and connectNL
17
Advertisement
Table of Contents
