Kubota GL6000-AUS Operator's Manual page 8

4 SAFETY PRECAUTIONS
CAUTION
To avoid personal injury:
A When checking engine or servicing, place the
engine on a wide and level ground. DO NOT work
on anything that is supported ONLY by lift jacks
or a hoist. Always use blocks or correct stands
to support the engine before servicing.
A Detach the battery from the engine before
conducting service. Put a "DO NOT OPERATE!"
tag in the key switch to avoid accidental starting.
A To avoid sparks from an accidental short circuit
always disconnect the battery's ground cable (-)
first and connect it last.
A Be sure to stop the engine and remove the key
when conducting
maintenance, servicing and cleaning.
A Check or conduct maintenance after the engine,
coolant, muffler, or muffler cover have been
cooled off completely.
A Always use the appropriate tools and jig-fixture
in good condition when performing any service
work. Make sure you understand how to use
them before service.
A Use ONLY correct engine barring techniques for
manually rotating the engine. DO NOT attempt to
rotate the engine by pulling or prying on the
cooling fan and V-belt. This practice can cause
serious personal injury or premature machine
damage to the cooling fan.
A Replace fuel pipes and lubricant pipes with their
hose clamps every 2 years or earlier whether
they are damaged or not. They are made of
rubber and are aged gradually.
A When servicing is performed together by two or
more persons, take care to perform all work
safely.
A Keep first aid kit and fire extinguisher handy at
all times.
daily and periodic