Password - D-Link xStack DWS-3200 Series Cli Manual

password

The password Line Configuration mode command specifies a password on a line. To remove the password, use
the no form of this command.
Syntax
password password [encrypted]
no password
Parameters
•
password — Password for this level. (Range: 1-159 characters)
•
encrypted — Encrypted password to be entered, copied from another device configuration.
Default Configuration
No password is defined.
Command Mode
Line Configuration mode
User Guidelines
If a password is defined as encrypted, the required password length is 32 characters.
Example
The following example specifies the password called 'secret' on a console.
Console(config)# line console
Console(config-line)# password secret
Page 32
AAA Commands
aaa authentication login