D-Link xStack DWS-3200 Series Cli Manual page 208

DXS/DWS-3200 series CLI Reference Guide
Console# show power inline ethernet 1/1
Port Powered Device
---- ----------------
----
1/1 IP Phone Model A
Overload Counter: 1
Short Counter: 0
Denied Counter: 0
Absent Counter: 0
Invalid Signature Counter: 0
The following table describes the fields shown in the display:
Field
Power
Nominal Power
Consumed Power
Usage Threshold
Traps
Port
Powered device
Admin State
Priority
Oper State
Classification
Overload Counter
Short Counter
Denied Counter
Admin
State Priority
------ --------
Auto High
Des cription
The inline power sourcing equipment operational status.
The inline power sourcing equipment nominal power in Watts.
Measured usage power in Watts.
The usage threshold expressed in percents for comparing the measured
power and initiating an alarm if threshold is exceeded.
Indicates if inline power traps are enabled.
The Ethernet port number.
A description of the powered device type.
Indicates if the port is enabled to provide power. Admin State can be Auto or
Never.
The priority of the port from the point of view of inline power management.
Priority can be Critical, High or Low.
Describes the inline power operational state of the port. Oper State can be On,
Off, Test-Fail, Testing, Searching or Fault.
Power consumption classification of the powered device.
Counts the number of overload conditions that has been detected.
Counts the number of short conditions that has been detected.
Counts the number of times power has been denied.
Page 205
Oper
State Class
------- ------
--
On Class
0