Porsche Classic Communication Management Plus Operating Manual page 25

Sound
Sound settings
The sound settings in the
HOME
allow you to adjust the sound of the audio sources
played back by your Porsche Classic Communication
Management Plus. To make adjustments, proceed
as follows:
Standard Equalizer settings
1. Press the Sound
HOME
2. Select the Equalizer menu option.
3. Select the option field you want
– Pop,
– or –
– Rock,
– or –
– Classic,
– or –
– Jazz,
– or –
– Custom settings.
Custom Equalizer settings
1. Press the Sound
HOME
2. Select the Equalizer menu option.
3. Select the Custom settings option field.
4. Tap and or turn the right-hand knob
to make the required setting (6 bands
or bass and treble).
25
Sound menu
button.
Fig.: Equalizer
Information
:
Under Custom settings, either a 6-band equaliser or
the settings for bass and treble appear, depending
on the vehicle's technical requirements.
Loudness
The Loudness function increases the audibility of low
frequencies at lower volumes.
1. Press the
2. Loudness
Loudness is switched on.
Loudness is switched off.
button.
Adjusting the fader
The fader controls the distribution of the volume
between rear and front speakers.
1. Press the
2. Select the Fader menu option.
Sound button.
HOME
Sound button.
HOME
3. Make the setting you want by tapping
or by turning the right-hand knob
Adjusting the balance
The balance controls the distribution of the volume
between left and right speakers.
1. Press the Sound
HOME
2. Select the Balance menu option.
3. Make the setting you want by tapping
or by turning the right-hand knob
Speed dependent volume adjustment
(with basic speakers)
You can set the volume increase in line with speed
using the speed-dependent volume adjustment.
1. Press the Sound
HOME
2. Select the Speed dependent volume menu
option.
3. Make the setting you want by tapping
or by turning the right-hand knob
and
.
button.
and
.
button.
and
.