Porsche Classic Communication Management Plus Operating Manual page 2

Part number:
99764259000
95564259000
Operating manual Version 1.0
Porsche, the Porsche crest, and other marks are
registered trademarks of Dr. Ing. h.c. F. Porsche
AG. Printed in Germany.
Reprinting, even of excerpts, or duplication of any
type is only permissible with the written authori-
sation of Dr. Ing. h.c. F. Porsche AG.
© 2022 Dr. Ing. h.c. F. Porsche AG
Porscheplatz 1
70435 Stuttgart
Germany
Equipment and owner's manual
Porsche reserves the right to alter the equipment
and technology vis-à-vis the illustrations and de-
scriptions in this manual to keep abreast of ongoing
developments of the Porsche Classic Communi-
cation Management Plus. The equipment variants
do not always reflect the standard scope of delivery
and may depend on country-specific options. For
information on how to install the Porsche Classic
Communication Management Plus, please contact
a Porsche Classic Partner or an Authorised Porsche
Dealership. The equipment of your Porsche Classic
Communication Management Plus may differ
from the description due to the differing statutory
provisions from country to country. If your Porsche
Classic Communication Management Plus features
equipment items not described here, your Porsche
Classic Partner or an Authorised Porsche Dealership
will tell you how to operate and maintain them
properly.
Please direct any questions, suggestions or ideas
concerning your Porsche Classic Communication
Management Plus to:
Dr. Ing. h.c. F. Porsche AG
Vertrieb Customer Relations
Porscheplatz 1
70435 Stuttgart, Germany
Germany
Warning notices and symbols
Risk of severe or fatal
WARNING
injury
Failure to observe warning notices in the "Warning"
category may lead to severe or fatal injury.
Be sure to observe warning notices.
INFORMATION
Failure to observe warning notices in the "Notice"
category may lead to material damage on the
vehicle or the Porsche Classic Communication
Management Plus.
Be sure to observe warning notices.
Information
Additional information is identified as "Information".
Prerequisites that have to be fulfilled to be able
to use a function.
Instruction to be followed.
1. Instruction to be followed with several succes-
sive steps.
Note on further information.
Information
The Auto-configure PCCM Plus function must
be run when the Porsche Classic Communication
Management Plus is used for the first time in order
to guarantee the full range of functions.
911 (Type 997) / Boxster (Type 987) / Cayman
(Type 987):
To run the function, press the
CAR
System Configure PCCM Plus Auto-configure
PCCM Plus button or the
HOME
System Configure PCCM Plus
PCCM Plus button.
Cayenne (Type 9PA):
To run the function, press the
CAR
Configure PCCM Plus button or the
Set Configure PCCM Plus button.
Set
Car Set
Auto-configure
Set
Car
HOME
2