Controlling Audio; 3-Way Speaker System Setup - Kenwood DMX8021DABS Instruction Manual

Controlling Audio

Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [Audio].
See the following section for each setting.
• Set up Speaker / X'over (P.63)
• Controlling EQ / SW Level (P.65)
• Set Position / DTA (P.68)
• Controlling Fader / Balance (P.65)
• Set Volume Offset (P.66)
• Set Sound Effect (P.67)
• Use Audio Memory (P.69)

3-way speaker system setup

Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
# CAUTION
• Connecting 3-way speakers with the 2-way
mode selected can break the speakers.
1
Press the [HOME] button.
h HOME screen appears.
h
2
Touch [
].
h Source selection screen appears. h
3
Touch [STANDBY].
62
4
Press the button 1 followed by the
button 2 for 1 second at the same time.
1
h Speaker system select screen appears.
h
5
Select the crossover network mode.
h A confirmation screen appears.
h
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Selection of the speakers to output sound from
the smartphone/cell-phone of Bluetooth HF/
Audio
– Beep for User Interface Setup
• While talking on the paired phone or using the
voice recognition function, the speaker system
cannot be switched.
2