Table of Contents
Advertisement
Setup
Special Setup
You can setup special parameters.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each parameter as follows.
■
[DEMO]
Select the demonstration mode. Default is
"ON".
[Software Information]
■
Confirm the software version of this unit.
(P.58)
[Open Source Licenses]
■
Display the open source licenses.
■
[Initialise]
Touch [Initialise] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
You can confirm the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
58
Display Setup
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Display].
h Display screen appears.
h
4
Set each parameter as follows.
■
[Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and keys.
[ON]: Dims the display and keys.
[SYNC] (Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[OSD Clock]
■
Select if you want to display the clock while
the screen is off, or while watching video files
on USB, etc.
"ON" (Default)/"OFF"
[Key Colour]
■
You can set the key illumination color.
(P.59)
[Wallpaper Customize]
■
You can change the wallpaper image or
color. (P.59)
[Viewing Angle]
■
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
"0" (Default)/"-1"/"-2"/"-3"
[Screen transition effect]
■
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/"OFF"
Advertisement
Table of Contents
