Pedal Installation - BANWOOD CLASSIC Manual

6
Step
L
R

Pedal Installation

· Please note that there is a letter at the end of the axle. "L" stands for left, "R" stands
for right.
· Using the spanner 15mm to fix the "L" pedal on the left side and "R" pedal on the
right side
Right pedal - fasten to the right
Tighten the pedals:
• Make sure the threads of each pedal are fully into the crank
arm.
Left pedal - fasten to the left
WARNING:
Ensure pedals are
secure in crank arms so the will not loosen.
Periodically check tightness.