•
Tool operators and maintenance personnel must
always comply with the safety precautions given in
this manual and on the stickers and tags attached to
the tool and hose.
•
These safety precautions are given for your safety.
Review them carefully before operating the tool and
before performing general maintenance or repairs.
•
Supervising personnel should develop additional
precautions relating to the specific work area and
local safety regulations. Place the added precautions
in the space provided in this manual.
•
This tool will provide safe and dependable service if
operated in accordance with the instructions given
in this manual. Read and understand this manual
and any stickers and tags attached to the tool and
hoses before operation. Failure to do so could result
in personal injury or equipment damage.
•
Check the rules and regulations at your location.
The rules might include an employer's work safety
program. Regulations may identify hazards such
as working around utility supply lines or hazardous
slopes.
BE THOROUGHLY TRAINED BEFORE OPERATING
THE UNIT ALONE
•
Operator training must start in an area without by-
standers and use all the controls until he/she can
control the machine fully under the conditions of the
work area.
•
When learning to operate a machine, do so at a slow
pace.
KNOW THE WORK CONDITIONS
•
The operator must know any prohibited uses or
work areas for the machine. For example, exces-
sive slopes and poor or dangerous terrain condi-
tions must be avoided.
OBEY SAFETY RULES
•
Replace all faulty or leaking hydraulic hoses or fit-
tings before further operation.
•
Always operate the compactor with backhoe outrig-
6 ► HSX User Manual
SAFETY PRECAUTIONS
gers firmly on the surface. The compactor weighs
more than the bucket. Position the compactor with
caution.
•
Travel with the compactor in full tuck (transport) po-
sition only.
•
Never operate with any person near the compactor
or between the compactor and operator.
•
Operate the compactor in properly shored trenches
and excavations. Do not allow personnel to work in
the excavation near compactor operation.
•
Make sure all controls (levers and pedals) are in the
NEUTRAL position before starting the carrier.
•
Wear safety eye protection, hard hat and safety foot
protection while operating the compactor.
•
Operate the carrier or compactor from the operator's
seat ONLY. Make sure the seat belt is securely fas-
tened before activating any controls.
•
Make certain that no other personnel are within the
arc prescribed by the movement of the stabilizers,
front bucket or backhoe boom.
•
Keep hands and feet on the controls at all times
when the machine is running.
•
Before leaving the operator's seat, always lower the
loader arms and the backhoe boom.
•
NEVER leave the machine with the engine running.
ALWAYS ENGAGE THE PARKING BRAKE.
•
Stop the engine before attempting to make any re-
pairs or adjustments to either the carrier or compac-
tor.
•
To avoid personal injury or equipment damage, all
tool repair, maintenance and service must only be
performed by authorized and properly trained per-
sonnel.