Table of Contents
Advertisement
Points of Interest
Marking Your Position (Personalized)
Normally, marking you position is simply a two button process, MARK and ENTER. However, sometimes you
will want to personalize the POI you are marking to make it easier to identify later. You are able to change the
icon, change the name, and create a message. (You are also able to change the location coordinates as well
as the elevation. This changes the position that is being saved and is discussed in a following section.
1.
Press MARK.
2.
Use the Arrow joystick to highlight the field you want to change.
3.
Press ENTER.
4a.
If the icon field was selected: Use the Arrow joystick to select the icon
desired and press ENTER. To aid in your selection, the type of icon
selected is displayed in the information block at the top of the keypad.
4b.
If the Name field was selected. Use the Arrow joystick to select the
character desired and press ENTER. If you make a mistake, highlight
Back and press ENTER. To access the lower case characters, highlight
Shift and press ENTER. To clear everything and start over, highlight
CLEAR and press ENTER. When you are satisfied with the name, highlight
OK and press ENTER.
Note: User saved POI names can only be eight characters long (including
spaces).
4c.
If the Message field was selected. Use the keypad displayed just as was
described in 4b to enter a message for this POI. Message fields can have
up to 30 characters, including spaces.
When the Icon, Name and Message fields are done, use the Arrow joystick to highlight Save.
5.
6.
Press ENTER.
29
Mark Screen with Name
field highlighted.
Hide quick links:
Advertisement
Table of Contents
