Cf (Compact Flash) - Epson RC700 Series Maintenance Manual

8.4 CF (Compact Flash)

CF Removal (1) Turn OFF the Controller.
(2) Disconnect the power plug.
(3) Remove the Top Panel. (Mounting screw ×6)
(4) Remove the connector (CN39).
(5) Remove the CF mounting screw and the rubber.
(6) Pull the CF toward the direction of the arrow in the
CF Installation (1) Insert a new CF toward the opposite direction of the arrow in the picture above.
(2) Tighten the CF mounting screw (×1) and the rubber.
(3) Connect the connector (CN39).
(4) Mount the Top Panel. (Mounting screw ×6)
(5) Connect the power plug. Turn ON the Controller and make sure that the Controller
RC700 Series Maintenance Rev.3
Maintenance 8. Maintenance Parts Replacement Procedures
picture.
starts properly without any vibration or abnormal noise.
(5)
(4)
51